[Solved] How to Fix ‘No Command’ Error on Android

"No Command" error in Android is a serious issue for any Android user. It happens to a lot of Android devices now, so the users want a good solution for this problem. If you have also faced this issue and don't know how to solve it, then you have come to the right place. With the help of this article, you'll easily fix the Android "No Command" error in a short time. You will learn all the details about this error and why it appeared on your Android device.

Part 1: What is No Command Screen and Why It appeared?

You might see a resting Android robot icon with its back or an exclamation point in a triangle icon that says "No Command" when you are trying to boot your Android into recovery mode sometimes. Most of the time, resetting the Android device is easier and users can finish it without any problem. But some users have faced the "No Command" error when they are trying to reset their Android device.

Here are some reasons behind "No Command" error in Android -

• It happens when Super User Access has been denied.

• When you try to reset your smartphone, it may cause this error.

• Sometimes system glitch during OS software updates may cause this error.

• If the installation process of the app store is canceled, then you will see this error.

Part 2: The Best and Easiest Way to Fix Android No Command Error

If you were encountering the problem of "No Command Error ", don't worry! There is a permanent solution that can fix any Android system related issue for you within a few clicks. Fixppo for Android is that kind of tool to help you out in this situation. This amazing software will fix the "No Command" error in the Android device and give you a fresh Android system to use.

Features:

• No need to be tech-savvy.

• Highest success rate with a full guarantee.

• This all-in-one tool supports thousands of Android phones and tablets.

• It can fix various Android system issues such as no command error, the device is frozen, stuck on logo screen, white and black screen, the device won't update, etc.

Step 1: First, you should download and install the Fixppo for Android on a computer.

Step 2: Select the detail information of your Android device will be very important to download the accurate firmware for the fixing.

Step 3: After all the information has been filled, then a suitable firmware will be downloaded on your device.

Step 4: Connect the device to your computer once the firmware downloading has been finished, then the problem will fix your problem automatically.

Note: If you want to know how to get your device into download mode or more details, please click here for the Guide.

Part 3: Five Solutions To Fix "No Command" Error On Android

Here are the best 6 solutions for you to fix "No Command" error on Android -

1. Fix Android No Command Error by Removing the Battery

The most basic way to fix the Android "No Command" error is by removing the battery of your Android device.If your Android device's battery can be replaced then remove the back cover of your device after turning the phone off. Then remove the battery from it. Wait for a few minutes and input the battery again. Turn your phone on and check if the problem is solved or not.

2. Fix Android No Command Error by Booting up through Recovery Mode

Booting up your Android device can also fix the "No Command" error in Android. This is another solution to solve this problem. You need to be very careful in handling this solution and follow the guideline below in a step by step way without making any mistake. Making any mistake can worsen the situation. Also, make sure that your device is fully charged before carrying out this method. Here is how you can do it -

• First, you need to turn your phone off. Then you need to press and hold the "Power + Home + Volume Up" button. Keep holding the buttons until your phone logo appears and you should enter into the recovery mode.



• Then use the "Volume Down" button to select "Apply update from SD card".Once it's selected, then press the "Volume Down" button to go to the "Updater" option and select it.

• Then again use the "Volume Down" button for highlighting "fp_update_OTA[version number].zip" and select it.

• Now the device will start the installation process and after the process finishes, you will see a message that says, "Install from SD-card complete".

• Finally, you need to use the volume buttons to highlight and then select "Reboot system now" option to reboot your device.

3. Fix Android No Command Error by Force Restarting Your Android Device

You can easily fix the "No Command" error in Android by force restarting your device. It seems easy but sometimes easy solutions can solve bigger problems. Also, restart is the most basic solution for any system related issue on Android. To do this, you just need to press and hold the "Power + Volume Down" button until you see your device manufacturer logo.

4. Fix Android No Command Error by Entering Into Recovery Menu through Key Combination

The key combination is another great solution for fixing the "No Command" error in Android. This is a manual process and you need to unplug all kinds of connected devices with your Android device. Also, your Android device is fully charged for this whole process to function properly. Here is how you can fix this problem by entering into recovery menu through key combination -

• First, you need to press the "Power" button to get back to the home screen.

• You need to use the "Volume Up" and "Volume Down" button to change the options. You have to select "wipe data/factory reset" or "wipe cache partition" option for this process.



• Then you need to keep tapping the 3 horizontal lines on the left side of the screen until this works.

• When the data wiping is complete, you need to reboot your device by selecting "Reboot system now&            \                                      option from the recovery mode.

• After your phone restarts, check if the problem is solved or not. You can also try some manual solutions on different Android devices.

If you have a Samsung Galaxy device, you need to shut down the device and then press and hold the "Power + Volume Up + Home" buttons at the same time. When you see the Samsung logo appear, you need to select the recovery mode option to go forward.

If you have an LG device, you need to shut down the device, then press and hold the "Power + Volume Down" buttons. When you see the LG logo, you can release the keys and press the same buttons again until you see the "hard reset" menu. Then you need to use the volume buttons to confirm the hard reset.

5. Fix Android No Command Error by Flashing ROM

Flashing ROM is a tough solution for this issue and this process can be tricky for newbie usersand we strongly suggest you think more carefully before trying it.

Custom ROM is a similar version of Stock ROM and it'll give you new features to experience without any problem. Also, the "No Command" error will be solved automatically.

Make sure that you have unlocked the boot-loader on your device and this process will require ROM to flash. CyanogenMod is a popular version that you can use. Also, you'll need Google App's zip file and you can download it from this link. Before you download anything, you must make sure that your Android device is compatible with it. Then you need to download and install the TWRP recovery environment on your device and also enable developer options for this process to go smoothly.

Here is how to do it -

• Connect your Android device to your computer and transfer all the downloaded files into your devices' internal or SD card memory.



• Now you need to boot your Android device to TWRP mode by using "Power" and "Volume Down" buttons. Then click on the "Wipe" button for resetting it.



• On the next screen, you will see something like the below image and you need to swipe on your screen for entering into the reset process.



• Then go back to the home page and click on the "Install" option for flash ROM.



• On the next option, you need to select the latest zip file that you transferred into your Android device.



• Then you need to swipe on your screen again to confirm the installation or flash.



• Next, you need to wait until the installation process is complete and then head back to the home screen again to install the Google apps zip file by repeating the same process.



• Finally, after the installation process is done, you need to click on the "Wipe Data" for the last time and then click on the "Reboot System" button to restart your device.

Conclusion:

This article can be the best solution for you to solve the "No Command" error in Android. There is no need to panic if you don't know how to solve it. Just follow the instructions from here and we are sure that you can solve this issue on your own.